Bosch GTS1041A-09 REAXX™ Jobsite Table Saw

The Bosch Active Response Technology platform helps reduce the risk of injury to users by combining advanced Bosch sensors and electronics with mechanical injury-prevention systems. The REAXX™ table saw detects human flesh that comes in contact with the blade and rapidly drops the saw blade below the tabletop. This high-speed action helps mitigate the potential of serious user injury and occurs without damaging the blade. After activation, the system can be reset in less than 60 seconds. A dual-activation cartridge enables two incidents before a replacement cartridge is needed.

Features:

1. ACTIVE RESPONSE TECHNOLOGY™
• Mitigates injury to user in case of blade contact, dropping the blade under the table with no blade damage
• Allows system to be reset in under 60 seconds; all parts and instructions located on tool

2. REAR OUTFEED SUPPORT
(GTS1041-09 ONLY) Provides additional rear material support for cutting longer workpieces

3. THROAT PLATE
Locks in place with toolless lockdown system; quick and easy removal and reinstallation

4. CONTROL PANEL
• LED lighted display indicates saw status
• Saw app provides saw status and lockout options via Near Field Communication (NFC) - App available June 2016 •
• Mechanical lockouts for power switch and bypass switch, override key not required

5. SMART GUARD SYSTEM
Modular blade guard, riving knife and anti-kickback pawls are quick and easy to configure

6. ENHANCED SQUARELOCK™ RIP FENCE
Engineered for enhanced clamping and trueness with precision improvements for pre-squaring prior to locking

7. ADVANCED MOTOR ELECTRONICS
Custom electronics provide:
• Soft-start manages a gradual motor startup
• Speed control to maintain cutting speed under load
• Overload protection

8. UPFRONT PUSH STICK STORAGE
Located at the front of the tool for easy access and consistent placement

9. GRAVITY-RISE™ STAND
(GTS1041-09 ONLY) Rugged enough for the toughest jobsite abuse and handling

Specifications:

• RATING: 120V
• AMPERAGE: 15
• NO LOAD RPM: 3,650
• MAX. MOTOR HP: 4.0
• BLADE DIAMETER: 10"
• DADO SIZE: 13/16" (8" or less)
• ARBOR SIZE: 5/8"
• EXTENDED WIDTH OF TABLE TOP: 41-1/2"
• RIP FENCE CAPACITY: 25" (R)
• DEPTH OF CUT AT: 90° 3-1/8"
• DEPTH OF CUT AT: 45° 2-1/4"
• BEVEL RANGE: -2° – 47°
• TABLE TOP DIMENSIONS: 29-3/4" × 22-3/8"
• WEIGHT Saw: 78.0 lbs.
• Stand: 45.0 lbs. (GTS1041A-09 only)
• Rear Outfeed: 10.0 lbs. (GTS1041A-09 only)

Includes: (GTS1041A-09) GTS1041A REAXX™ jobsite table saw, TS3100 Gravity-Rise™ Stand, TS1016 rear outfeed extension support, 40 tooth blade, dual-activation cartridge, miter gauge, rip fence, Smart Guard System, push stick, dual-activation cartridge wrench, multifunction blade wrench, adjustment wrench